What Camera Path does
With most image-to-video tools, you describe the camera move in words ("slow push-in", "orbit to the left") and hope the model reads it the way you meant. Camera Path takes a more direct route: upload an image, draw a line over it, and the camera travels along that line in the finished video.
The line is only an instruction. It is drawn in red on top of your picture, the video model moves the camera along it from start to end, and the line itself is left out of the output. Camera Path runs on Seedance 2.0, or the cheaper Seedance 2.0 Fast. You can open Camera Path here.
When to use it instead of plain image-to-video
For simple shots, writing the camera move in the prompt works fine. Drawing the path helps when the direction or the shape of the move matters:
- You need a specific direction. "Pan" can go left or right. A line drawn from left to right removes the guesswork.
- The move is curved. An orbit around a product or a glide along a winding road is hard to describe precisely, but easy to draw.
- You want the shot to land on something. End the line on the person, the doorway or the sign you want the camera to finish on.
- You are matching several shots. For an ad or a short film, drawing similar paths on several images keeps the motion consistent from clip to clip.
If you only want a little life in a still image, like hair moving in the wind or a slow drift, the regular image-to-video tool with our own model costs far less. See how to turn a photo into a video.
How to make a camera-path video, step by step
- Open Camera Path and upload a PNG or JPG (up to 12 MB). You can also start from the image-to-video tab in the generator: the Camera Path button there carries your image over.
- Hold and drag on the image to draw the path. Start where the camera should start and stop where it should end. Undo removes the last stroke and Clear removes them all.
- Write a scene prompt: the look, the light, and what the subject is doing. You don't need to mention the red line. The instruction to follow it and keep it out of the video is added automatically.
- Choose the model (Seedance 2.0 or Seedance 2.0 Fast), the length (5 or 10 seconds) and the aspect ratio (9:16, 16:9 or 1:1).
- Press Animate along path. The button shows the credit cost before you render. When the video is ready, you can play it and download it right there.
Six camera moves to try (with example prompts)
Each recipe gives the kind of image, how to draw the line, and a prompt to start from.
- Slow push-in on a portrait.
Image: a woman in her 30s sitting by a café window.
Line: short and straight, from the bottom edge toward her face, stopping just below her eyes.
Prompt: "Slow cinematic push-in toward her face, soft afternoon window light, she looks up from her cup and smiles slightly." - Half orbit around a product.
Image: a glass perfume bottle on a stone tabletop.
Line: a shallow arc that curves around the front of the bottle, from left to right.
Prompt: "The camera circles halfway around the bottle, studio lighting, highlights sliding across the glass, dark clean background." - Pan across a landscape.
Image: a mountain lake at dawn.
Line: level, along the horizon, from left to right.
Prompt: "Slow pan across the lake at sunrise, mist drifting over the water, gentle ripples." - Pull-back reveal.
Image: a street with a small café in the middle.
Line: start on the café and drag outward toward a corner of the image.
Prompt: "Slow cinematic pull-back revealing the whole street, warm sunset light, people walking past."
Moving away from the subject is the hardest thing to show with a flat line, so expect to try this one more than once. - Crane up over a city.
Image: rooftops at dusk.
Line: straight up, from the bottom of the image toward the skyline.
Prompt: "The camera rises slowly above the rooftops, city lights switching on one by one at dusk." - Follow a winding trail.
Image: a forest trail with a man in his 40s walking ahead.
Line: an S-shaped curve that follows the trail into the distance.
Prompt: "The camera glides along the winding trail behind him, sunlight filtering through the leaves, light breeze."
Tips for drawing a path the model follows
- Direction matters. The camera moves from where you started drawing to where you stopped. If it goes the wrong way, clear the line and draw it in the other direction.
- One smooth stroke works best. You can draw several strokes, but a single clean line is the clearest instruction. Loops and zigzags are usually followed only loosely.
- Match the line to the clip length. A short line suits 5 seconds; save long, sweeping paths for 10 seconds. A long path squeezed into 5 seconds tends to feel rushed.
- Leave room in the frame. Orbits and pans need space around the subject. In a tightly cropped image, the camera has nowhere to go.
- Keep the prompt about the scene. Describe the light, the mood and what people or things are doing, and let the line handle the camera. Words like "slow" or "smooth" are enough to set the pace.
- Choose the aspect ratio before you render. The default is 9:16. Switch to 16:9 for landscapes and pans, or 1:1 for product shots. The ratio closest to your image usually gives the best result.
- Test with Fast first. Seedance 2.0 Fast costs roughly a third as much. Use it to check that the path reads the way you meant, then make the final version with Seedance 2.0.
Length, models and credits
Camera Path videos are 720p. The cost depends on the model and the length:
- Seedance 2.0: 940 credits for 5 seconds, 1,880 credits for 10 seconds.
- Seedance 2.0 Fast: 335 credits for 5 seconds, 670 credits for 10 seconds.
In countries with regional pricing, the number of credits is adjusted, so go by the amount shown on the button. If a video can't be made, the credits are returned.
Camera Path is available on paid plans. Studio and Studio Plus include a monthly allowance for these videos; the Unlimited plan does not include them.
FAQ
Do I have to mention the red line in my prompt?
No. The instruction to follow the line and leave it out of the video is added for you. Use the prompt to describe the scene.
Will the line show up in the video?
The model is told to treat the line as a guide only and not to draw it. If a trace of it does appear, render again with a simpler path.
Can I use an image I made on EGAKU?
Yes. Make the image in the generator, then use the Camera Path button in the image-to-video tab to bring it over. You can also download it and upload it on the Camera Path page.
Can I use it on the free plan?
No, Camera Path is for paid plans. On the free plan you can still animate images with the regular image-to-video tool and our own model EGAKU β 1.5, and your first video there is free.
Seedance 2.0 or Seedance 2.0 Fast?
Use Fast for drafts and for testing a path. Use Seedance 2.0 for the final version, when detail and smooth motion matter most.
Can I use photos of real people?
Only photos you have the rights to, of people who have agreed to it. Otherwise, use an illustration or an image you generated yourself.
Limits to know about
- Videos are 720p, 5 or 10 seconds long, in 9:16, 16:9 or 1:1.
- Source images can be PNG or JPG, up to 12 MB.
- The path is a flat line on a flat image, so moves toward or away from the subject (push-ins and pull-backs) are left to the model's interpretation. Results vary, and some shots take a second try.
- Complex paths are followed more loosely than simple ones.
- During large moves, especially orbits, faces and fine details can shift slightly.
Ready to direct your first shot? Open Camera Path, upload an image and draw the move.